| available options |
Infill device in front version (font OCR B1) or in rear
(font OCR A1 or MasterCard). LCD off line editing. Auxiliary printer
port. Chip contact initialising. |
| built-in tipper unit |
Yes, in model 821T |
| communication interface |
Serial RS232 port. |
| dimensions and weight |
Model 821: 450 x 485 x 290 mm x 35 kg,
(17,75"x19"x11,50"x78 lbs). Model 821T: 585 x 485 x 290 mm x 42 kg,
(23"x19"x11,50"x93 lbs) |
| drum capacity |
Drum capacity: 60/80/105 characters, embossing and/or
infill. |
| electrical requirements |
117 V / 60 Hz - 220 V / 50 Hz. |
| input hopper capacity |
Manual feed: SPA (Single Point Access system).
Pre-embossed card feed feature. |
| magnetic stripe encoding |
3 Tracks ISO 7811, LoCo-MeCo/HiCo. |
| performance |
One card in 15 seconds |
| reject |
Alarm notification. |
| software |
Windows based application software. Firmware: self
diagnostic, selectable automatic repeat card, pre-encoded card
reading with full post processing of the same card, resettable and
non resettable counters. System status and diagnostic messages
reported on PC. |
| |
| |
|
 |
|
 |
|
 |
|
| A unit designed for immediate and
decentralised issuance of small quantities of plastic cards. |
| • Equipped with the SPA system: Cards
are inserted and removed from the single access point for maximum
operator convenience. |
| • Convenient and easy to use. |
| • Optional magnetic stripe encoding
|
| • Two available versions: without
(821) and with (821T) TIPPING module. for embossed characters.
| |
