| available options |
Infill device in front version (font OCR B1) or in rear
(font OCR A1 or MasterCard). Chip contact initialising. FLIP-OVER
module (front/rear print). Floor stand unit for Pro-Series. |
| bar codes |
Code 39, EAN8, EAN13, 2/5 int, Code 128, Codabar and
others. |
| built-in tipper unit |
Off-line tipping possibility (11 lines). Ribbon saving
feature. |
| communication interface |
Serial RS232 port and parallel port. |
| dimensions and weight |
1200 x 480 x 350 mm x 80 kg. (47,25"x19"x13,75"x178
lbs) |
| drum capacity |
Drum capacity: 105 characters, embossing and/or
infill. |
| electrical requirements |
117 V / 60 Hz -220 V / 50 Hz. |
| fonts/printing |
Internal or Windows True type fonts. |
| graphics |
Lines, frames, logos, photo images. |
| input hopper capacity |
200 cards. |
| magnetic stripe encoding |
3 Tracks ISO 7811, LoCo-MeCo/HiCo. |
| output hopper capacity |
200 personalised cards. Reject hopper. |
| performance |
Approx. 500 CPH standard credit card format in
embossing. |
| printing area |
Full card size. |
| printing orientation |
0°, 90°, 180°, 270°. |
| resolution |
300 DPI. |
| software |
Windows based application software. Firmware: self
diagnostic, selectable automatic repeat card, pre-encoded card
reading with full post processing of the same card, resettable and
non resettable counters. System status and diagnostic messages
reported on PC. Optional LinkWare application for in-line operation
with other Pro-Series modules. |
| |
|
| |
|
 |
|
 |
|
 |
|
| The Combi 1000 combines high
resolution thermographic printing with embossing, indent, tipping,
magnetic stripe and chip encoding in just one pass |
| • Equipped with the MSP system,
allowing 4 cards to be processed simultaneously. |
| • Easy maintainence: Operator
changeable print head |
| • Optional chip encoding station
|
| • Available with special characters
for the personalisation of international credit cards such as VISA
and MasterCard. | |
